Valves and accesories


2 Tubeless detachable presta valves + adaptor

Blister with 2 detachable tubeless presta valves with caps and nuts + presta-schrader adapter + 2 flat O-ring + 2 valve washer + wrench to open and close the valve Very confortable, in order to introduce the sealant, the check can be disassembled without disassemble the tyre. The valve core can also be tighten with spoke wrench or a small flat one.


 COMPATIBLE WITH SCHRADER AND THIN HOLE RIMS.
 COMPATIBLE WITH UST TUBELESS RIMS FROM MAVIC AND OTHER BRANDS.
 DETACHABLE.
 COMPATIBLE WITH ROAD RIMS.


2 Tubeless detachable schrader valve + valve cap

Blister with 2 tubeless schrader valves mechanised in brass, 2 caps, 2 nuts a valve cap to disassemble and replace the valve core. If the sealant stuck the valve core, it can be replaced by any schrader valve core.

 COMPATIBLE WITH THICK HOLE RIMS.
 DETACHABLE.
 NOT COMPATIBLE WITH UST TUBELESS RIMS FROM MAVIC.
 NOT COMPATIBLE WITH OUTER THICK HOLE AND INTERNAL THIN HOLE RIMS (EXCEPT ENLARGING).
 NOT COMPATIBLE WITH ROAD RIMS.


Recommended product: With no doubt, the best valve for converted rims. More robust than the thin one as the valve core can not break. It allows more air to cross and therefore is easier to heel the tyre. It can be used with the gas station compressor without adaptors. The valve core can be changed as in the thin ones. The valve cap included can be used to disassemble it and can be brought nuted as a cap. Do you need more reasons?


2 Special valve washer for extra large valve holes

It is used in case of rims with extra large diameter valve hole, in which the conical junction and the flat one do not mach properly.


2 presta detachable tubuless valve extenders + torque wrench

OPTIONS:


 2 EXTENDERS WITHOUT OUTER THREAD.
 2 35 MM LONG THREADED VALVE EXTENDERS.
 2 65 MM LONG EXTENDERS WITH OUTER THREAD.
 

¡WITH OUTER THREAD TO TUBELIZE HIGH PROFILE RIMS!
Blister with 2 detachable extenders for presta valve with outer thread that make them suitable to use with the tubeless system. 2 plastic washers are included in order to avoid the nut to stand directly on the rim. Required for high profile rims. A plastic wrench is included to tighten both the extender and the valve core.

COMPATIBLE WITH DETACHABLE PRESTA TUBELESS VALVE.


2 Valve core for presta valve

Blister with 2 valve core for detachable presta valve.
The valve core is tighten to the body of the valve with the black coloured small wrench included in the 2 presta valves blister, the tubeless kit or the 10 wrenches blister. Also with a spoke wrench or a small flat one.


 COMPATIBLE WITH UST TUBELESS RIMS.
 COMPATIBLE WITH DT SWISS AND ECLIPSE VALVES.


10 Valve core for presta valve

Blister with 10 valve core for detachable presta valve.
The valve core is tighten to the body of the valve with the black coloured small wrench included in the 2 presta valves blister, the tubeless kit or the 10 wrenches blister. Also with a spoke wrench or a small flat one.


 COMPATIBLE WITH UST TUBELESS RIMS.
 COMPATIBLE WITH DT SWISS AND ECLIPSE VALVES.


10 Valve core removers to open/close the presta valve

Blister with 10 wrenches to remove or put the valve core on detachable presta valves.


2 Valve core for schrader valve

Blister with 2 valve core for detachable schrader valves.


10 Valve core for schrader valve

In addition to being used as a spare to your tubeless valve, you can use them for inner tubes or to replace periodically the valve core of the shock absorber and suspension forks, which work with high pressures and get damaged quickly. Replace yourself the valve core the fork or the shock absorber and avoid the tedious pressure loss. 


10 Valve cap for schrader valve

Blister with 10 valve cap for detachable schrader valves. Replace yourself the valve core from your valve, from your inner tube, the fork or the shock absorber and avoid these tedious pressure loss caused by the damage of the valve cores rubber junction.


100 ml inyector

100 ml inyector with flexible coupling, compatible with both schrader and presta valves. Use it to apply the seal in a comfortable way through our detachable valves. Compatible with both schrader and presta valves. The best option to introduce thesealant in non detachable presta valve inner tubes.


Needle

With a 1,6mm width inner hole, to refill the wheel without open it or disassemble it or take out the valve core. Simply poking and injecting the sealant refill.


10 Presta - Schrader adapters.

Presta to Schrader adapter for inflating the wheels at gas stations or pumps with Schrader valve head. Internal thread for a perfect fit in fine and valve seal to prevent air leakage during inflation. External thread.