NEW X-TUBE, THE MOST RELIABLE WAY TO MEASURE THE ANTI-PUNCTURE LIQUID FROM THE INSIDE OF YOUR WHEEL! With X-Tube, check the level and condition of the anti-puncture fluid in your wheel in a few minutes.
NEW X-TUBE, THE MOST RELIABLE WAY TO MEASURE THE ANTI-PUNCTURE LIQUID FROM THE INSIDE OF YOUR WHEEL! With X-Tube, check the level and condition of the anti-puncture fluid in your wheel in a few minutes. Unscrew the valve core, let air out of the tire, connect the X-Tube to the 100ml X-Sauce injector and insert the X-Tube inside the valve body. Extract the liquid inside the injector in its entirety to see how much you are carrying. Simultaneously check the condition of the anti-puncture liquid. In good condition the sealant is light, milky brown in color, a darker or more tranlucent color indicates sealant is in poor condition. Finally, depending on each case, recharge the amount you need or replace completely, reassemble valve core and inflate.
The X-Tube is not compatible with Spin Bits. Our granulated powder additive offers greater effectiveness against punctures, as they are larger solid particles than those included in the sealant itself, but for this reason it would clog the fine conduit of the X-Tube, not allowing the sealant to flow correctly through it.
Yes it is necessary since the X-Tube has a connector to adapt to the injector. You can buy the X-Tube separately or with the injector.
Yes. You need to rince well after each use with lots of water to eliminate any remains of sealant liquid to avoid obstruction. Following these instructions, this accessory will last a long time.
Yes, X-Tube is an accessory compatible with both Schrader valves and Presta valves from X-Sauce.
