¡NEW TUBELESS TIRE REPAIR KIT! Kit for repairing holes or cuts that anti-pucture liquids cannot seal. The kit contains: 6mm tool, 3,5mm tool, 5x6mm tire seal, 5x3,5mm tire seal, cutter and glue.
You can choose whether to use it or not. The glue is provided to offer both options to the cyclist. The tire seals are sticky enough so you do not have to use the glue, but if you decide to use it, absolutely nothing will happen. Add some glue to the wick before inserting it and insert it into the tire to be repaired. Wait a few minutes for it to dry.
The answer is no, the tire seal should not be introduced until it reaches the tire wall or rim bed. It should always be inserted leaving a few centimetres of tire seal out. Once inserted, cut the remaining tire seal with the cutter provided. You should never cut the tire seal flush to the tire - you should always cut with a 4mm margin, as if it were one more rubber nob of the tire.
Yes, however you must be careful and before repairing the tire with several tire seals, you must make sure that the repair can be performed safely. If the cut is a very large slash and inserting several tire seals is not enough, the best option is to dismantle the wheel and install an inner tube. This way we will guarantee that the tire will not tear, which could happen, and we can continue with our ride safely. For smaller cuts there will be no problem inserting several tire seals to repair the tire.